logored.gif (11207 bytes)

5015-Type Circular Connectors

Specifications

Although the AS-5015 series originally intended for use on military type equipment, this series is intended for non-military applications where the connector qualities of rugged design, reliability, economic cost and intermatebility are important. This connector series is not QPL'd.

MATING GUIDE

 

Plug

Receptacle

 
Strain relief


300/AS3057 & 300/AS3420


300/AS3106


300/AS3108


300/AS3100


300/AS3102


300/AS3101

Strain relief


300/AS3057 & 300/AS3420

APPLICATION

Communication equipment, transporting carriers, vessels, railroad, aircraft related equipment, industrial devices and machines, machine tools, measurement equipment, computer, petroleum and geophysical equipment.

Threaded Coupling and Uncoupling

 

The plug can be coupled or uncoupled from the receptacle by simply turning the coupling nut on the plug. No special tools are required.

How to order

300/AS

Explanation:

Shell style: 3100 - Wall mounting receptacle Class: A - for general purpose, solid backshell
  3101 - Cable connecting plug   B - for general purpose, split backshell
  3102 - Box mounting receptacle   C - receptacle for pressurized application
  3106 - Straight plug   E - environment resistant
  3108 - 90 angled plug   K - fire & flame resistant
      R - environment resistant
 
Shell size and contact arrangement:
 
8S-1 10S-2 10SL-3 10SL-4 12S-1 12S-3 12S-4 12S-5 14S-1

14S-2

14-3 14-4 14S-5 14S-6 14S-7 14S-9 14S-12 16S-01 16S-1 16S-4
16S-5 16S-6 16S-8 16-9 16-10 16-11 16-12 16-13 18-1 18-2
18-3 18-4 18-5 18-8 18-9 18-10 18-11 18-12 18-13 18-16
18-18 18-19 18-20 18-21 18-22 20-01 20-2 20-3 20-4 20-7
20-8 20-10 20-11 20-15 20-16 20-17 20-18 20-22 20-23 20-24
20-27 20-29 20-33 22-2 22-4 22-5 22-7 22-8 22-9 22-10
22-13 22-14 22-15 22-18 22-19 22-21 22-22 22-23 24-2 24-02
24-3 24-4 24-5 24-7 24-9 24-10 24-11 24-12 24-22 24-28
28-2 28-3 28-6 28-10 28-11 28-12 28-15 28-16 32-9 32-13
32-15 32-16 32-17 32-20 32-22 32-73 36-1 36-03 36-3 36-4
36-5 36-7 36-8 36-9 36-10 36-20 36-54 40-56    
     
Contact type:   Alternate insert position
  P - male
S - female
  Click to see details
       

CONTACT CURRENT CAPACITY

The rated current of a connector will change depending on the number of contacts composing the connector and also the contact size. The table below shows the maximum permissible value per contact when assembled in an insulator.

Contact size Diameter of the contacting part of pin contact Current Capacity (Amps)
Contact unit Assembled in insulator
#16 0.063" (1.6mm) 22 13
#12 0.094" (2.4mm) 41 23
#8 0.142" (3.6mm) 73 46
#4 0.224" (5.7mm) 135 80
#0 0.358" (9.1mm) 245 150
 
VOLTAGE RATING
 
Classification code Test Voltage (RMS) Operating Voltage Air Spacing Nominal Creepage Distance Nominal
DC AC (RMS)
INST 1000 250 200 - 0.063" (1.6mm)
A 2000 700 500 0.063" (1.6mm) 0.126" (3.2mm)
D 2800 1250 900 0.126" (3.2mm) 0.189" (4.8mm)
E 3500 1750 1250 0.189" (4.8mm) 0.252" (6.4mm)
B 4500 2450 1750 0.252" (6.4mm) 0.311" (7.9mm)
C 7000 4200 3000 0.311" (7.9mm) 1.0" (25.4mm)
 
 
INSULATION RESISTANCE:   TEMPERATURE RANGE:   HUMIDITY:
5,000 MOhm minimum at 25C   -50C to +125C   Relative Humidity: 95% 3%
Temperature: 71C 2C
Time: 14 days
DURABILITY:   THERMAL SHOCK:  
500 mating/unmating operations   MIL-STD-202 Method 107  
VIBRATION:   SHOCK, ELECTRICAL:   SALT SPRAY:
MIL-STD-1344 Method 2005. 10~500 Hz or 10G units   1/2 sine wave Transient shock impulses of 50G units   MIL-STD-1344 Method 1001
Sweeptime: 15 minutes   Time: 11 1msec   Salt solution: 5%
Test current: 100 mA   Test current: 100 mA   Time: 48 hours
         
CONNECTOR ENGAGING/SEPARATION FORCES COMPATIBLE WIRE SIZE
     
16 Contacts   2 kg min   48 kg max
12 Contacts   3 kg min   80 kg max
  8 Contacts   5 kg min 160 kg max
  4 Contacts 10 kg min 240 kg max
  0 Contacts 15 kg min 320 kg max
Contact Applicable Wire Size
Size Solder pot diameter Wire size (AWG) Conductor cross-section area
# 16 0.073" (1.85mm) 16 ~ 22 1.25 sq. mm max
# 12 0.116" (2.95mm) 12 ~ 14 3.5 sq. mm max
# 8 0.209" (5.31mm) 8 ~ 10 8 sq. mm max
# 4 0.333" (8.45mm) 4 ~ 6 22 sq. mm max
# 0 0.469" (11.91mm) 0 ~ 2 50 sq. mm max
MATERIAL AND FINISH
  Shell: Aluminum alloy Die-Casting, oliver drab chromate over cadmium or Zinc plating
  Insulator: Polyester molding Compound & polychloroprene rubber ('A" class only)
  Contacts: Copper alloy Brass, 100 minches Silver plating
  Retention Clip: Heat treated beryllium copper

Alpha Center
351 Irving Drive, Oxnard, CA 93030, USA
2010 Alpha Products, Inc. All rights reserved.