|
PRODUCT
SPECIFICATIONS |
Switch system
Each contact block has one double break snap action switching
mechanism |
Electrical rating
5A @250v AC; 8A @125V AC; 0.2A @250V DC; 6A @ 24V DC |
Switch mode
Momentary or alternate action 1-4 poles |
Max. insulation voltage
2000V, 60 Hz min between all terminals and ground |
Contact material
Soldering type - silver is standard
Socket type - pin with golden plating |
Acceleration
>10g in all 3 planes |
Body material
High-grade temperature resistance thermoplastic. Contact housing molded in
electrical high-grade thermoplastic. |
Vibration resistance
IEC 68-2-6 test |
Operation travel
3.0mm |
Soldering heat resistance
IEC 341-1, >1000 Ohm 500V DC |
Actuating force
2-5N depending on number of contact block |
Panel thickness
8.0mm max |
Mechanical life time
>2 million operations |
Degree of protection
IP65 |
Electrical life time
| |
alternate action |
momentary action |
|
5A/250V AC |
>5.0x104
operations |
>2.5x104
operations |
|
4A/250V AC |
>1.20x105
operations |
>6.0x104
operations |
|
2A/250V AC |
>4.0x105
operations |
>2.0x105
operations |
|
1A/250V AC |
>8.0x105
operations |
>4.0x105
operations |
|
Storage temperature
-40°C to +85°C |
Initial contact resistance
<10mOhm current 1A AC according to IEC 341-1 test 1, silver contact
< 15 mOhm 20mV according to IEC 341-1 test 11, gold contact |
Operating temperature
-25°C to +55°C
with lamp
-25°C to +70°C
without lamp |
Terminal
Diameter of wire 2x0.8mm
Diameter of standard cable 0.75mm2
max |
Alternate action
Push-on, push-off |
